HOT WATER STORAGE TANKS

STANDARD VERTICAL EPOXY LINED
WITH OPTIONAL R16 FOAM INSULATION

MOST OF OUR TANKS CAN ALSO BE BUILT IN STAINLESS STEEL USING IN-STOCK MATERIAL – PLEASE INQUIRE

 

NON-STOCK TANKS ARE BUILT TO ORDER IN 3 – 4 WEEKS

 

 

Vertical Water Tanks

IMPORTANT: Operating temperatures near the 180 ºF maximum can shorten service life. We recommend an upgrade to a glass lined tank if this is likely. Epoxy lined tanks are not recommended for solar heating systems due to water temperatures over 180 ºF often being experienced.

STANDARD HOT WATER TANKS
TECHNICAL SPECIFICATIONS

These Hanson lined potable hot water storage tanks are built and tested in accordance with the A.S.M.E. Boiler and Pressure Vessel Code Section IV for potable hot water storage tanks and bear the “HLW” stamp, and serial number, national board number as required. A copy of the A.S.M.E. data sheet HLW-6, signed by an A.S.M.E. authorized inspector, will be sent with the invoice if requested at time of order.

Standard exterior paint system is power buff to SSPC-SP3 plus one coat 2/3 MIL DFT rust resistant primer. Standard interior finishes are porcelain enamel, aka “GLASS”, epoxy or cement.

All tappings and flange openings are plugged and covered before shipment. Manway covers are installed for shipping only, and must be adjusted and tightened before the tank is pressurized.

Sacrificial magnesium alloy anodes are shipped loose with all glass lined tanks for installation at the jobsite. These must be checked periodically in service and replaced if necessary to protect the tank lining.

The A.S.M.E. name plate and the supplied lift lugs are installed to allow clearance for tank insulation, which is available at extra cost.

Water storage tanks are guaranteed free from defects in material and workmanship for one year from the date of shipment, FOB our factory. Full limited warranty terms are available on request.

Due to recent, significant, volatility in the steel market, a surcharge may apply to the prices

GALLS SIZE WT# SQ.FT DRAWING / PART# NET PRICE FOAM INSUL ORDER NOW
JPG format PDF format
140 30″ x 51″ 326# 37 ES-30-140-V ES-30-140-V $ 4,079.00 $ 525.00 ES-30-140-V
180 30″ x 63″ 375# 44 ES-30-180-V ES-30-180-V $ 4,181.00 $ 609.00 ES-30-180-V
235 30″ x 84″ 473# 58 ES-30-235-V ES-30-235-V $ 4,474.00 $ 758.00 ES-30-235-V
305 36″ x 77″ 641# 65 ES-36-305-V ES-36-305-V $ 4,807.00 $ 862.00 ES-36-305-V
335 36″ x 84″ 577# 71 ES-36-335-V ES-36-335-V $ 4,963.00 $ 922.00 ES-36-335-V
400 36″ x 99″ 669# 83 ES-36-400-V ES-36-400-V $ 5,297.00 $ 1,256.00 ES-36-400-V
462 42″ x 84″ 794# 83 ES-42-462-V ES-42-462-V $ 5,752.00 $ 1,079.00 ES-42-462-V
534 42″ x 96″ 877# 95 ES-42-534-V ES-42-534-V $ 6,123.00 $ 1,208.00 ES-42-534-H
660 42″ x 120″ 1065# 116 ES-42-660-V ES-42-660-V $ 7,084.00 $ 1,443.00 ES-42-660-H
585 48″ x 83″ 1014# 95 ES-48-585-V ES-48-585-V $ 7,495.00 $ 1,238.00 ES-48-585-V
712 48″ x 100″ 1162# 113 ES-48-712-V ES-48-712-V $ 8,514.00 $ 1,436.00 ES-48-712-V
800 48″ x 111″ 1458# 125 ES-48-800-V ES-48-800-V $ 9,103.00 $ 1,569.00 ES-48-800-V
900 48″ x 122″ 1369# 137 ES-48-900-V ES-48-900-V $9,576.00 $ 1,698.00 ES-48-900-V
1040 54″ x 115″ 1764# 146 ES-54-1040-V ES-54-1040-V $ 11,074.00 $ 1,825.00 ES-54-1040-V
1225 56″ x 127″ 1806# 166 ES-56-1225-V ES-56-1225-V $ 12,397.00 $ 2,050.00 ES-56-1225-V
1450 60″ x 130″ 2075# 185 ES-60-1450-V ES-60-1450-V $ 14,114.00 $ 2,277.00 ES-60-1450-V
1650 64″ x 130″ 2354# 197 ES-64-1650-V ES-64-1650-V $ 18,330.00 $ 2,428.00 ES-64-1650-V
1950 72″ x 123″ 2659# 213 ES-72-1950-V ES-72-1950-V $ 18,261.00 $ 2,638.00 ES-72-1950-V